Brick Calculator

Estimate how many bricks you need from wall size and brick dimensions, with an allowance for wastage.

Give our building estimate service a try

PDF, DWG, XLSX • 24hr option • NDA available

Pro Tip: Press Ctrl + D to Bookmark this page

brick calculator calculator
Please select one from the above dropdown
Add an allowance for wastage (optional)
What size is your wall? (m2)
Summary
NameTotal
Area Calculation0.00 m2
Number (per m2)0.00
Total0.00

How to use the Brick Calculator

  1. Measure wall width and height to get area (m²). Deduct openings if needed.
  2. Select a standard UK brick or enter custom brick dimensions (mm) and mortar joint (typically 10 mm).
  3. Choose a wastage allowance (5–10%) for cuts and breakages.
  4. Review bricks per m² and total bricks. Export or copy the result.

Planning a tender? Use this as a benchmark, then order a QS estimate with BoQ, prelims, overheads and profit, and risk.

Standard UK brick sizes (with mortar)

  • Standard house brick: 215 × 102.5 × 65 mm with ~10 mm joints
  • Facing bricks: often similar to standard; confirm actual size from the supplier

Always check your product’s datasheet; small size changes affect bricks per m².

Bricks per m²: quick rules of thumb

  • Half-brick wall (single skin): ~60 bricks/m²
  • One-brick wall (double skin): ~120 bricks/m²

Bond choice (e.g., English or Flemish) and joint width can move these figures slightly.

Worked example: garden wall

Wall size: 4.0 m × 1.5 m = 6.0 m²

Single skin: 6.0 × 60 = 360 bricks

+10% wastage: 360 × 1.10 = 396 bricks

Tips to avoid under-ordering

  • Measure carefully; round up where cuts are likely.
  • Confirm brick size and joint width before ordering.
  • Use higher wastage for complex bonds or frequent cuts.

Mortar allowance (rule of thumb)

For a 1:5 cement:sand mix, allow roughly 120 kg cement and ~0.4 m³ sand per 1,000 bricks. Adjust for joint width and brick size.

FAQs

Are these brick counts tender-ready?

No. They are planning-grade benchmarks for budgeting and ordering. For tenders, use a QS-prepared estimate with a BoQ plus prelims, overheads and profit, and risk allowances.

Do I need to add wastage?

Yes. Allow 5–10% for cuts, breakage and pattern adjustments. Use the wastage option in the calculator to add this automatically.

How many bricks per m² should I assume?

For standard UK bricks (215 × 102.5 × 65 mm) with 10 mm joints, allow ~60 bricks/m² for a half-brick wall and ~120 bricks/m² for a one-brick wall. Pattern choice can nudge this slightly.

What if I’m using non-standard sizes or patterns?

Enter your exact brick dimensions and select your wastage. Complex bonds or more cutting typically need a higher allowance.

Local preview · no sending

Local preview. Use synthetic details only. Sending and file selection are disabled. The sample preview uses separate fixed details. Your entries stay in this browser.

Sample enquiry preview ready. Nothing will be sent.

Looking for a tailored estimate for your project, or interested in discussing your ideas further? Fill out our contact form below, and our team will reach out to provide personalised guidance!
Name *
Select Your Inquiry
Need Help? Chat with us

Start a Conversation

Hi! Click below to chat to us on WhatsApp

We usually respond within a few minutes during business hours.

Cost EstimatorSupport